Reasonable price Salt Spray Corrosion Test - Automatic Computer Control 90 Degree Peel Force Tester Tensile Tester Machine – Hongjin
Reasonable price Salt Spray Corrosion Test - Automatic Computer Control 90 Degree Peel Force Tester Tensile Tester Machine – Hongjin Detail:
1. Hongjin main scope of testing machine
Electronic universal material testing machine, Horizontal tension testing machine, Hydraulic universal testing machine, MFI,Charpy Impact, Izod Impact, Hardness tester, Torsion tester, Metallographic series, Oven ,Enviromental test chamber(Temperature and Hmidity Chamber),UV ozen and xenon Aging chamber ,vibration tester ,Hast chamber,Waterproof test chamber ,Leak detection ,Optical detection series and so on. (We accept customization.)
2. Product
Brief: It adopts full digital power, displacement and speed three closed loop control, using AC motor and control drive system,with precision worm gear reducer and precision screw drive to achieve the transmission efficiency and signal-to-noise ratio of the best effect.
Function: Tester is used to test physical properties of elongation, compression, peeling, tearing bending, 3-point bending,
shearing of metallic and non-metallic material and so on.
Meeting standards: It can be customized to meet GB, ISO, JIS, ASTM, DIN requirement and the standard provided by client to test and data processing.
Application ranges: This machine is commonly applied in material analysis in auto-parts, fastener, aerospace, cable and wire,plastic and rubber, paper packing industries.
3. Features of control and data processing system
1) With advanced chipping technology and professionally designed data gathering and amplifying system,the tester is highly integrated,reliable and convenient. Control software automatically derives data of tensile strength, yield strength, fracture strength, modulus of elasticity, elongation.The open formula edition function allows automatic calculation of force, tension displacement deformation at any designated point. The standard in the process of control and data processing meet national requirement for testing metallic material and non-metallic material.
2) Control method: fixed speed, fixed displacement, fixed loading, fixed load increasing rate,fixed tension, fixed tension
increase rate.
3) Automatically resetting: After the test begins, measuring system automatically reset to zero.
4) Automatic shifting: automatically changes range when load changes to make sure precise collection of data.
5) Automatic saving: testing data and testing condition are automatically stored to avoid data loss caused by forgetting saving.
6) Batch testing: For specimen with same setting, batch test can be performed after setting the test sequence.
7) Display mode: data and curve are presented while testing.
8) Curve display: after testing, it is possible to revisit the curve to analyze. Move your mouse on the curve to find relative
data at each point.
9) Curves: parameters: stress-strain, force-displacement, force-time, displacement-time results are displayed and printable.
10) Parameters: Force parameters(g,kg,N,lb)
Stress parameters(kg/mm2,N/mm2,Mpa,lbf/in2)
Displacement parameters (m,mm,in）
11) Test report: test reports are edited and printed according to the desired format by client and can be output as Excel files.
12) Safety protection : safety mechanism is triggered when overloading is above 2~10%
13) The tester is able to automatically test and calculate mechanic property of specimen. It is also possible to intervene
manually in the analyzing process. Automatic analyzing test results are revised according to relevant standard to improve data accuracy.
Product Parameters
|
Test items
|
Strength
|
|
Monitor
|
670 power display
|
|
Unit of strength
|
Kgf,N,KN,Lb,g
|
|
Capacity selection
|
1、2、5、10、20、50、100、200、500kgf
|
|
Load cell accuracy
|
0.5%
|
|
Test stroke
|
Maximum 650mm (extended type 1000mm) without fixtures
|
|
Test effective space
|
120mm diameter range
|
|
Stop mode
|
Upper and lower limit safety setting, emergency stop button,
program force and elongation setting, and test piece breakpoint
sensing |
|
Equipped
|
One set of standard fixtures,user manual and product warranty card
|
|
Power
|
Ac motor
|
|
Strength and selective elongation
|
Strength and two points of extension
|
|
680 power extension display
|
680 plus 210 two-point extender
|
|
Extension unit
|
mm、cm、in、%
|
|
Power resolution
|
1/50,000
|
|
Test speed
|
30~300mm/min can be adjusted arbitrarily
|
Product Show
Product detail pictures:
Related Product Guide:
Cooperation
Our personnel are always in the spirit of "continuous improvement and excellence", and together with the top-quality good quality solutions, favorable selling price and superior after-sales providers, we try to acquire each customer's rely on for Reasonable price Salt Spray Corrosion Test - Automatic Computer Control 90 Degree Peel Force Tester Tensile Tester Machine – Hongjin , The product will supply to all over the world, such as: Poland, Kazakhstan, Bahrain, Insisting over the high-quality generation line management and prospects guide provider, we've made our resolution to offer our shoppers using the initially stage purchasing and soon after provider working experience. Preserving the prevailing helpful relations with our prospects, we even now innovate our product lists the many time to meet up with the brand new wants and stick to the latest trend of this business in Ahmedabad. We're ready to facial area the difficulties and make the transform to grasp many of the possibilities in international trade.
By Steven from Iran - 2017.04.18 16:45
Problems can be quickly and effectively resolved, it is worth to be trust and working together.
By Cornelia from New Zealand - 2017.03.28 16:34
