Middle Tube Bending Tester Fully Automatic Reciprocating Test Durability Tester
The machine uses static weights as the anti-compression knife, which is applied to the carbon fiber middle tube on the two fulcrums, and the deformation amount of its fixed load is understood by the display. Full inspection of the tube.
Parameters of Middle tube bending test machine
| Test drive | air pressure |
| Pivot spacing | 500~1050mm adjustable |
| Test Range | Set at 0~80mm |
| Scimitar load resistance | 500 lbs (combination) |
| Anti-curved knife diameter | (SR 220mm, top cut down 55.6mm) and (SR 25.4mm, H 130mm) can be replaced |
| Two point support fixture | (R 25.4mm, H130mm) *3, (R 25.4mm, H106mm)* 1 (R 25.4mm, H85.5mm) *1 |
| Minimum deflection display | 0.01mm |
| Volume (D×H×H) | 1956*1020*500cm |
| Weight (approx.) | 83 kg |
| Power supply | 1∮, AC220V 50Hz |
| Air pressure source | 5.5kgf/cm2 (bring your own) |
| Operating environment conditions | Room temperature 23±3ºC, humidity 60±5%. |
Write your message here and send it to us
