Laboratory Environmental Ipx9 Rain Test Device Chamber/Water Spray Resistance Tester
Uses The main function of this device is to test the performance of the product during storage, transportation and use under high temperature, high pressure and rain climate. This device is mainly used for electronic and electrical products, lamps, electrical cabinets, electrical components, automobiles, motorcycles. Under the climatic conditions of high temperature, high pressure and rain, the physical and other related properties of the product are tested under the conditions of simulating high temperature, high pressure, and rain. After the test, the performance of the product is judged by verification to meet the requirements for product design and improvement. , Verification and factory inspection.
Meets the following execution criteria
1.IEC60529
2.GB4208
3.DIN40050-9
4.ISO20653
5.EN 60529
6.DIN 40050-9 protection level requirements
| Studio size(customizable) | W1000 × H1000 × D1000mm |
| Dimensions(customizable) | W1450 × H1750 × D1500mm |
| Test time | 30s (120 positions in 4 positions) |
| Water spray ring angle | 0 °, 30 °, 60 °, 90 ° |
| Number of water jets | 4 |
| Water spray temperature | Room temperature -85 ℃ |
| Water spray distance | 100mm ～ 200mm |
| Water spray pressure | 8-10mpa |
| Speed of sample table | 1 ～ 5r / min |
| Load capacity of sample platform | 15kg |
| High temperature flow meter | Flow rate is 14 ～ 16 L / min |
| Spray water temperature | 80 ℃ ± 5 ℃ |
| Jet water pressure | 80 ~ 100 bar (8000 ~ 10000kpa) |
| Water spray flow | 14 ~ 16L / min |
| Water spray distance | 10 ~ 15cm |
| Water spray angle and time | 0 °, 30 °, 60 °, 90 °, water spray at each angle for 30 seconds |
| Turntable | 300mm diameter |
