Lab equipment environmental high and low temperature test chambers for sale

Short Description:

Product Description Features 1. High-quality appearance, the body adopts arc shape, the surface is treated by matte stripe, and the plane has no reaction handle, which is easy to operate, safe and reliable. 2, rectangular laminated glass viewing window, can be used in the test to observe the test, the window has a sweat-proof electric heater device to prevent condensation, and high-brightness PL fluorescent lamp to keep the box inside lighting. 3, with test holes can be connected to the t...


Product Detail

Product Tags

Product Description

Features


1. High-quality appearance, the body adopts arc shape, the surface is treated by matte stripe, and the plane has no reaction handle, which is easy to operate, safe and reliable.
2, rectangular laminated glass viewing window, can be used in the test to observe the test, the window has a sweat-proof electric heater device to prevent condensation, and high-brightness PL fluorescent lamp to keep the box inside lighting.
3, with test holes can be connected to the test power line or signal line and adjust the storage tray up and down;
4. The double-door isolation of the door is tight and tight, which can effectively isolate the internal temperature leakage.
5. The special temperature rise and fall temperature rate controllable technology can realize the continuous and arbitrarily adjustable temperature rise and fall;
6. The compressor circulation system adopts the French “Taikang” brand, which can effectively remove the lubricating oil between the condensation tube and the hand thin tube. The whole series adopts the environmental protection medium (R-404, R-501) of the United States.
7. The controller uses the imported LCD display screen to display the measured value and set value at the same time.
8. The controller has multiple programs to edit the humidity and temperature for quick (QUICK) or slope (SLOP) control.
9. The built-in moving pulley is easy to move and place with a strong positioning screw fixing position.HJ-ZK1

Product introduction


The High and Low temperature chamber test machine simulates different environmental condition. It’s appropriate for testing material performance, such as resist heat, resist dry,resist humidity and resist cold. That can define performance of material.

 

Test Standard:climate simulation chamber
GB/T2423/5170/10586, JIS C60068, ASTM D4714, CNS3625/12565/12566

 

Characteristics:


1.High and Low temperature chamber test machineUse the high precision microcomputer touch temperature and humidity controller with high stability of platinum resistance to temperature and wind speed in the circulatory system of temperature and humidity test.
2.High and Low temperature chamber test machinecontrol temperature&humidity well-distributed, precisely and steady.
3.High and Low temperature chamber test machine Completely independent system separate for testing in high temperature, low temperature and constant temperature&humidity environment.

 

Technical Parameters
Model HY-TH-80 HY-TH-150 HY-TH-225 HY-TH-408 HY-TH-800 HY-TH-1000
(A~F) (A~F) (A~F) (A~F) (A~F) (A~F)
Inner size: W×H×D(mm) 40*50*40 50*60*50 60*75*50 60*85*80 100*100*80 100*100*100
External size W×H×D(cm) 105*165*98 105*175*108 115*190*108 135*200*115 155*215*135 155*215*155
Temperature range (low:A:+25℃; B:0℃;C:-20℃; D:-40℃;E:-60℃;F:-70℃) ( high :+100℃/+150℃)
Temp analytic accuracy/uniformity 0.1℃/±2.0℃
Temperature control accuracy ±0.5℃
Heat; cooling time Heat up about 4.0°C/min ;  Cooling about 1.0°C/min
Inner and outer materials SUS#304 Stainless steel for inner chamber ; Carton Advanced cold plate nano paint for outer
heat insulation material Resistant to high temp ,high density,formate chlorine,ethyl acetum foam insulation materials
cooling system Air cooling/single segment compressor(-40°C) ,air and water double segment compressor
(-50°C~-70°C)
Protection devices Fuse switch, compressor overload switch, refrigerant high and low pressure protection switch,
super humidity over-temperature protection switch, fuse, failure warning system
Parts Watching window , 50mm testing hole , PL internal bulbs , Wet and dry bulb gauze , partition plate , castorx4,Foot Cupx4
Compressor Original France”Tecumseh”brand
Controller TEMI South Korea
Power AC220V 50/60Hz & 1,AC380V 50/60Hz 3
weight (kg) 150 220 270 320 450 580

HJ-BZ2hj-2_01hj-2_02hj-2_03hj-2_04

Company Information

 HJ-4HJ-11HJ-3

Packaging & Shipping

 HJ-5HJ-12

FAQ

 

1. Are your company a trading one or a factory?
Factory ,13years focusing on test instruments field,3 years exporting experience.Our factory is in Dongguan, Guangdong, China

2. After an order is placed, when to deliver?
Usually about 15 working days, if we have finished products, we can arrange delivery within 3 working days.
Please note that our production lead time depends on the specific project and the number of projects.

3. What about the warranty with after – sales services?
12 months warranty.
After the warranty, the professional after-sales service team will provide comprehensive technical support to help customers solve problems encountered when using our products, and promptly handle customer problems and complaints.

4. What about the services and product’ quality?
Service: ,Design service,Buyer lable service.
Quality: Each instruments must be carried out 100% quality examination and test, the finished products must through a third party calibration institutions before shipping and delivery goods.

 


  • Previous:
  • Next:

  • Write your message here and send it to us
    WhatsApp Online Chat !