Battery pack low pressure test machine Battery simulation low pressure test chamber

Short Description:

Product name: Guangdong battery pack low pressure testing machine Product use: Guangdong battery pack low air pressure testing machine has self-protection functions, such as over-current, over-current, over-voltage, overheating, power failure, misoperation, etc., it has the ability to prevent sudden power failure and damage to the equipment, and can sound Light alarm prompt. Test bench load ≥1000kg Testable battery sample size W2600mmXD1800mmXH500mm Test chamber volume ≥12m3...

Send email to us Download as PDF

Product Detail

Product Tags

Product name: Guangdong battery pack low pressure testing machine
Product use: Guangdong battery pack low air pressure testing machine has self-protection functions, such as over-current, over-current, over-voltage, overheating, power failure, misoperation, etc., it has the ability to prevent sudden power failure and damage to the equipment, and can sound Light alarm prompt.

Test bench load	≥1000kg
Testable battery sample size	W2600mmXD1800mmXH500mm
Test chamber volume	≥12m3
control interface	Adopt PLC touch screen man-machine control interface, PLC interface can set test conditions and save
Test Control Software	There are two ways to test: fixed value operation and program operation, which can save test data, curves, alarm records and other information.
Test chamber air pressure	Adjustable (simulates air pressure at different altitudes)
Adjustable range of air pressure in the box	8Kpa-101.3Kpa. Relieve the air pressure in the full range to the normal pressure for no more than 10min
sealing requirements	The door of the test chamber should consider the overall safety, sealing and reliability. The thickness of the door is ≥10cm, and there should be no air leakage after closing.
child car	The sample is transported into the test box by the way of running the sub-mother car. The sub-mother car bears a weight of ≥1000kg, and the running car has a locking device.
terminal	The test box has two sets of test interfaces (one for standby and one for use), including 800v, 500A high-voltage positive and negative interfaces, current test interfaces, BMS CAN communication interfaces, and 12V power line connections.
Video Surveillance	The equipment is equipped with video monitoring device, the mainstream configuration in the market, with explosion-proof and night vision functions, adjustable focal length and adjustable angle to clearly observe and video record the complete sample in the box and the entire box ground, and the monitoring can be remotely controlled and coordinated with the control system. The camera is detachable and easy to replace
Pressure relief method	There are two methods of manual pressure relief and automatic pressure relief. In the vacuum state, the pressure inside the box can be automatically opened to balance the pressure, or the inside and outside of the box can be connected by hand.
Pressure relief protection	When the gas pressure in the box rises, the pressure relief port at the top can be quickly opened after being sensed by the pressure sensors near the pressure relief port to discharge the gas and The heat reduces the pressure inside the chamber.
Power supply	AC380V±10% three-phase five-wire system 220V±10% single-phase system, frequency 50Hz±10%