1KN 2KN Desktop Type Mini Universal Tensile Test Machine Small Tensile Tester

Short Description:

1. Hongjin main scope of testing machine Electronic universal material testing machine, Horizontal tension testing machine, Hydraulic universal testing machine, MFI,Charpy Impact, Izod Impact, Hardness tester, Torsion tester, Metallographic series, Oven ,Enviromental test chamber(Temperature and Hmidity Chamber),UV ozen and xenon Aging chamber ,vibration tester ,Hast chamber,Waterproof test chamber ,Leak detection ,Optical detection series and so on. (We accept customization.) 2. Product Brie...


Product Detail

Product Tags

1. Hongjin main scope of testing machine
Electronic universal material testing machine, Horizontal tension testing machine, Hydraulic universal testing machine, MFI,Charpy Impact, Izod Impact, Hardness tester, Torsion tester, Metallographic series, Oven ,Enviromental test chamber(Temperature and Hmidity Chamber),UV ozen and xenon Aging chamber ,vibration tester ,Hast chamber,Waterproof test chamber ,Leak detection ,Optical detection series and so on. (We accept customization.)

2. Product
Brief: It adopts full digital power, displacement and speed three closed loop control, using AC motor and control drive system,with precision worm gear reducer and precision screw drive to achieve the transmission efficiency and signal-to-noise ratio of the best effect.

Function: Tester is used to test physical properties of elongation, compression, peeling, tearing bending, 3-point bending,
shearing of metallic and non-metallic material and so on.

Meeting standards: It can be customized to meet GB, ISO, JIS, ASTM, DIN requirement and the standard provided by client to test and data processing.

Application ranges: This machine is commonly applied in material analysis in auto-parts, fastener, aerospace, cable and wire,plastic and rubber, paper packing industries.

3. Features of control and data processing system
1) With advanced chipping technology and professionally designed data gathering and amplifying system,the tester is highly integrated,reliable and convenient. Control software automatically derives data of tensile strength, yield strength, fracture strength, modulus of elasticity, elongation.The open formula edition function allows automatic calculation of force, tension displacement deformation at any designated point. The standard in the process of control and data processing meet national requirement for testing metallic material and non-metallic material.
2) Control method: fixed speed, fixed displacement, fixed loading, fixed load increasing rate,fixed tension, fixed tension
increase rate.
3) Automatically resetting: After the test begins, measuring system automatically reset to zero.
4) Automatic shifting: automatically changes range when load changes to make sure precise collection of data.
5) Automatic saving: testing data and testing condition are automatically stored to avoid data loss caused by forgetting saving.
6) Batch testing: For specimen with same setting, batch test can be performed after setting the test sequence.
7) Display mode: data and curve are presented while testing.
8) Curve display: after testing, it is possible to revisit the curve to analyze. Move your mouse on the curve to find relative
data at each point.
9) Curves: parameters: stress-strain, force-displacement, force-time, displacement-time results are displayed and printable.
10) Parameters: Force parameters(g,kg,N,lb)
Stress parameters(kg/mm2,N/mm2,Mpa,lbf/in2)
Displacement parameters (m,mm,in)
11) Test report: test reports are edited and printed according to the desired format by client and can be output as Excel files.
12) Safety protection : safety mechanism is triggered when overloading is above 2~10%
13) The tester is able to automatically test and calculate mechanic property of specimen. It is also possible to intervene
manually in the analyzing process. Automatic analyzing test results are revised according to relevant standard to improve data accuracy.

 

Product Parameters

Capacity selection (kg)
50、100kg
Load resolution
1/10,000
Maximum stroke (without fixture)
1000mm
Test speed
30~300mm/min
Data sampling frequency
100Hz
Monitor
Real-time value, maximum value (peak value) with pull-off stop,
upper and lower limit setting, point ratio setting
Real-time value, maximum (peak) displacement,
upper and lower limits of elongation, and breakpoint ratio setting
Motor
Stepping motor
Host size
490x380x186cm
Power supply
AC220V can be based on country or designation
Unit switch
Kgf,lbf,N,kN
Load accuracy
±1%
Speed input method
Knob (ten turns)
Displacement resolution
0.001mm
Rotating lever
Ball screw or ordinary screw
Machine weight
90kg

 

Product Show

7501 7504 7505 7503 7502

未标题-1


  • Previous:
  • Next:

  • Write your message here and send it to us
    WhatsApp Online Chat !