Hongjin HAST High Pressure Accelerated Aging Test Chamber
The purpose of accelerated life test is to increase environmental stress (such as temperature) and working stress (voltage, load, etc. applied to the product), speed up the test process, and shorten the life test time of the product or system. It is used to investigate and analyze when the problems of wear and service life of electronic components and mechanical parts occur, what is the shape of the failure distribution function of service life, and the test to analyze the reasons for the increase in failure rate.
☆China Boiler Association pressure vessel safety inspection passed
☆The design of the circular and horizontal inner tank is convenient for users to pick and place the product to be tested
☆Motor-driven magnetic fan mechanism circulation (good temperature/humidity distribution)
☆The safety program automatically shuts down, automatically releases pressure, automatically breaks the vacuum, and automatically feeds water
☆HAST equipment body material SUS#316, external packaging material SUS#304
☆Structural design of circular test groove and safety door ring buckle
☆Even humidity distribution of electromagnetic fan motor circulation device
☆Material of main body and main water inlet pipe SUS#316
☆ Timing socket and BIOS sterling silver wire 20 PIN
☆Saturated or unsaturated programmable control mode
☆Temperature / humidity / wet bulb / temperature / pressure / voltage display
The control system has passed EMC (Electromagnetic Compatibility) verification
Full color LCD TFT, Simplified/Traditional/English display
0.1℃ / 1% RH accurate resolution capability
9999 HOURS / STEP Controllable time per segment
USB2.0 storage interface and curve record
12 bit D/A temperature and humidity conversion interface
Fully automatic control and safety protection coordination system
High power LED operating status indicator
performance:
1.1 Set temperature: +100 ℃ ～ +147 ℃ (steam temperature)
1.2 Humidity range: 75~100% vapor humidity (the maximum humidity is 75% at 47℃)
1.3 Humidity control stability: ±3%RH
1.3 Working pressure: 1.2~2.89kg (including 1atm)
1.4 Time range: 0 Hr ～ 999 Hr
1.5 Pressurizing time: 0.00 Kg ～ 1.04 Kg / cm2 about 45 minutes
1.6 Temperature fluctuation uniformity: ±0.5℃
1.7 Temperature display accuracy: 0.1℃
1.8 Uniformity of pressure fluctuation: ±0.1Kg
1.9 The uniformity of humidity distribution: ±3%RH
Test chamber material:
2.1 Test box size: round test box
2.2 Overall dimensions: 900x 700 x 1600 mm (W * D * H) vertical
2.3 Inner barrel material: stainless steel plate material (SUS# 316 3 mm)
2.4 Outer barrel material: stainless steel plate material or spray plastic
2.5 Insulation material: rock wool and rigid polyurethane foam insulation
2.6 Heating tube of steam generating chamber: Titanium tube heating, never rust.
Post time: Dec-21-2021